SMALL SIZE SPOT WELDER RECOMMENDED PACKAGES FOR VARIOUS PURPOSES
Compact Package With Minimum Price
[ DESCRIPTION ]
- This package only consists HSW-01A machine, but even so a lot of welding operations can be done with it.
- Trigger switch is made so that it is able to be pushed on several directions.
- Please get the stainless steel wire needed at Do-It-Yourself stores.
- Please also get the safety eyewear and the copper plate (about 0.3 mm in thickness) at Do-It-Yourself stores.
- Welding pens are included in this HSW-01A package.
- If more strength is needed, the use of HSW-02A is recommended.
This is the minimum price package for welding thin stainless steel wire and iron were, also welding a 0.08 mm nickel tab to low-current battery.
DESCRIPTION
- Using foot switch, it is possible to trigger HSW-01A using foot.
- We also recommend HSW-G1 Safety Eyewear.
- HSW-N12 Nickel thin plate with 0.08mm in thickness is specialized for low-current.
This package is suitable for welding tab to battery; for making battery set for devices operating within low-current under 1 A alone. This package comes with Nickel thin plate.
DESCRIPTION
- Welding pinset, used with one hand, will pinch the materials.
- Using HSW-G1 Safety Eyewear is highly recommended.
- It is possible to trigger by foot using Foot Switch.
- Welding lines less than 0.5mm in thickness requires power controller to adjust the voltage applied during welding.
HSW-G1 Safety Eyewear
This package is suitable to weld stainless thin plate and lines using welding pinset to pinch.
Also, this package comes with power controller which is useful to weld thermocouple and lines or plate less than 0.3 mm in thickness.
DESCRIPTION
- It is possible to trigger by foot using Foot Switch.
- Using HSW-G1 Safety Eyewear is highly recommended.
-HSW-N6425F Nickel thin plate is for high-current.
- Welding pen is included in HSW-02A.
This package is suitable for connecting a series of NiCad batteries and making battery set for devices operating within high-current alone. Also, due to the pulse range adjustor, it is possible to weld even very thin metals.
DESCRIPTION
- It is possible to trigger by foot using Foot Switch.
- Using HSW-G1 Safety Eyewear is highly recommended.
- HSW-N6425F Nickel thin plate is for high-current.
- Welding pen is included in HSW-01A.
This package is suitable for welding that requires strength such as stainless line/plate. Also, due to the pulse range adjustor, it is possible to weld even very thin metals.
[ WORK EXAMPLE ]
Stainless Steel Cylinder, Stainless Steel Craft
With the Welder machine(HSW-02A), Pinset for Thermocouple (HSW-TC1), Power Controller (HSW-PC1), Safety Eyewear (HSW-G1), Foot Switch (HSW-F1N), since it can control the voltage and pulse range, it can weld thermocouples with any kind of thickness.
